Custom Glass Sneeze Guards

Price Starts at $42.00

Order Now

Also known as: Commercial Sneeze Guards, Frameless Sneeze Guards, Glass Sneeze Guard, Restaurant Glass Sneeze Guards and Office Sneeze Guards

We fabricate flat glass to your project specifications, meaning we can cut to precise measurements, drill, edge, and make any other necessary customizations to make your perfect piece of flat glass.


Glass Types: Tempered Glass
Thicknesses (in): 1/4 is standard, 3/16 and 3/8″ available.
Sizes: Up to 60” x 96”
Shapes: Square / Rectangular is standard, but we can produce to almost any shape.
Glass Tints: Clear as well as many glass tint colors, etched
Edgework: Standard, flat, bevels and rounded pencil edge
Holes and Slots: Cut by water jet prior to tempering if needed
Delivery Most glass panel orders Ship in 3-5 days

*See FAQs below for more detail

  • Frameless Sneeze Guards
  • Glass Sneeze Guard

Commercial Sneeze Guards Pricing

Office Sneeze Guards

We carry several different types of glass. Tempered Glass is normally used for commercial sneeze guards. Use our online pricing and ordering system. You may customize your order to your requirements. Below are the most common selections for glass sneeze guards.

  1. Glass Type: Tempered Glass
  2. Glass Shape: Square / Rectangular
  3. Dimensions (width and height in inches) Cutting Tolerance is +/- 1/16
  4. Glass Thickness ¼” is typically used. Other thicknesses are available.
  5. Glass Tint: Available in clear, tints or satin etch for privacy.
  6. Edges can be finished, ground and or polished
  7. Fabrication: We can drill Holes, Clamp Notches, Hinge Cut-Outs, Plug Cut-outs, Finger Pulls and more

Tempered Glass Office Sneeze Guards / Protective Glass Dividers

Add a protective layer between customers and employees to enforce social distancing. Our tempered glass sneeze guards are custom cut to fit your work area and hardware or frames requirements.

Glass panels provide better visual appeal, are easier to clean and resist scratching when compared to polycarbonate.

Many businesses are investing in glass dividers to extend the height of cubicle walls in employee work areas. Glass dividers are being used to protect the receptionist desk often with cutouts allowing paperwork to be passed.

Custom Glass Sneeze Guards /Glass Dividers FAQs

Always use tempered glass for glass sneeze guards and glass divider panels. Using anything less than tempered glass poses a hazard if someone bumps into the glass and it shatters, leaving sharp edges.

No, There are many types of mounting hardware, rails and posts available from hardware providers. We provide custom cut tempered glass at a better price and a faster delivery than our competition.

1/4” clear panels are the most popular but some people use 3/8” for longer spans or 3/16” for shorter spans. Check with your local building department for local requirements. You can also use our glass weight load calculator to see the relative strengths of glass panels for various spans and thicknesses of glass.

Tempered glass is stronger than standard glass and does not shatter into large shards when broken. Tempered glass is often used in applications where using standard glass could pose a potential danger. Manufactured through a process of extreme heating and rapid cooling, tempered glass is much harder and stronger than normal glass.

When cleaning your glass panels, choose a good quality glass cleaner that will not leave unsightly streaks. Use a lint-free cloth, or better yet, some crumpled newspaper or coffee filters, to wipe down the glass, taking care not to use too much of the cleaner.

If the glass is framed by wood or other non-glass material, do your best to keep the glass cleaner on the glass so you don’t ruin non-glass material. Two popular products for cleaning glass include Windex and the powdered version of Bar Keepers Friend cleaner (which also works great on other various household surfaces.) Another great and chemical-free option would be to use a polishing microfiber cloth designed specifically for cleaning glass surfaces with a water spray bottle.

The industry-wide accepted tolerance on 1/8″, 3/16″, and 1/4″ is +/- 1/16″. This includes side shift on laminated products. The industry-wide accepted tolerance on 3/8″ and 1/2″, +/- 1/8″. This includes side shift on laminated products.

Glass thicknesses are shown as a Nominal Thickness, meaning “in name only”, used solely for identification. These are commonly listed as 1/8″, 5/32″, 1/8″, 3/16″, 1/4″, 3/8″, and 1/2″. The nominal size may not match the exact thickness but will be within the acceptable industry-wide thickness range and can correspond to a large number of highly standardized dimensions and tolerances.


Dan Dolton


5/5 stars
Great selection, extremely fast service and precise dimensions.

Tanya H.


5/5 stars
Well packaged and well made. Exceeded expectations.

Bruce Petrovic


5/5 stars
Fast service.

Mark Samars


5/5 stars
Great product at a great price

Ken Clement


5/5 stars
quick shipping, packaged well, and competive priced...

Jeff Levy


5/5 stars
Not my first order. Always perfect and on time.

Ellen Kowallis


5/5 stars
Why was this never told to me that it was an option? So grateful I found this company. Saved me hundreds and potentially thousands of dollars. Thank you so much!

Brian Jensen


5/5 stars
Fantastic service! Great quality!

Kaylon Ross


5/5 stars
So fast and the perfect measurements

Ken Nesbitt


5/5 stars
Ordering was very easy and prices were just what I was looking for. Updates kept me informed and my order arrived earlier than expected! Arrived very well packed in great condition. Very pleased.

FREE & Guaranteed Safe Shipping

FREE and Guaranteed Safe Shipping Guaranteed All packages are sent insured. Our standard shipping method is FedEx Ground which delivers most domestic shipments within 7 business days but in most cases we can ship as fast as FedEx Next Day Air.

loading Reviews