Shower Door Hardware
Also known as: shower door parts, shower door hinges, shower door handles, shower door pull, shower towel bar.
Available as part of shower door and shower glass panel purchases. Selections made during online quote process. *See FAQs below for more detail
Description
Thicknesses: | Hardware for 3/4 inch or 1/2 inch glass |
Finishes*: | Chrome, Brushed Nickel and Oil Rubbed Bronze |
Hinges*: | Wall Mount Offset Back Plate Hinge |
Handle: | Shower door pull 6” or 8” |
Towel Bar*: | 24 inch or 30 inch |
U Channel*: | Used for securing fixed panels of glass. |
Clamps*: | Nice option compared to the more traditional U-Channel |
Frameless Shower Door Hardware
Shower Door Hinge for attaching glass to wall. This high quality shower door hinge is designed to fit industry standard templates. It features a solid brass drop forged construction, stainless steel coil springs, and a stainless steel reversible hinge pin. The reversible hinge pin allows the hinge to be set at 0 degrees or 5 degrees. The 5 degree setting holds the door against a stop.
Fits tempered glass 3/8″ to 1/2″ thick. Installation requires a cutout in the glass where the hinge is installed.
Back-to-Back Handles: Back-to-Back Tubular Pull Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles do not include decorative metal washers, although standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back), and come in 6″ and 8″ sizes.
Single-Sided Towel Bars Without metal washers are designed for glass mounting on fixed panels or doors. Uses 1/8″ low profile end caps, The bars are constructed of 1.5 mil thick heavy brass tubing. Plastic washers protect against glass-to-metal contact. Available in 24” and 30” lengths.
U-Channel for 3/8″ and 1/2″ glass: Deep pocket and regular U-Channel does an excellent job of securing fixed panels of glass. These are typically wet glazed with clear silicone to secure glass. Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8″ (10 mm) and 1/2″ (12 mm) thick glass are available. This 3/4″ (19 mm) high profile Deep U-Channel can be used as the top channel in installations where the glass must be inserted into the top, then lowered into the 3/8″ (10 mm) tall Regular U-Channel used at the bottom of the enclosure.
Clamp Hole-in-Glass Style: For 3/8″ to 1/2″ (10 to 12 mm) glass. used to secure fixed panels of glass for frameless shower enclosures. A nice option compared to the more traditional U-Channel, in that the clamps help to achieve the appearance of an ‘all-glass’ look. Glass fabrication of holes required to accommodate the clamps. Mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clear silicone can be used to provide a clean, water-tight seal.
Finishes
All Shower Door Hardware is available in 3 finishes: Brushed Nickel, Chrome and Oil Rubbed Bronze
Custom Glass Deck Panels FAQs